- GVS: Industrial Vacuum Loader
- Hydraulic Vibrator on Collector Body.
- Vacuum Blower Temperature Gauge.
- Liquid Level Indicator
- Debris body Safety Prop.
- Rear Porthole with Deflector.
- Rear port hose assembly
- Toolbox
- Air Vacuum Relief Valve
- Manual Vacuum Relief Valve
- 6″ diameter rear knife gate drain valve
- Positive Displacement Hibon 8702 Vacuum Pump, 5250 cfm 27”Hg
- High Efficiency Exhaust Silencer.
- Heavy Duty NAMCO Transfer Case with Manual Shifting.
- Single Stage Filtration for Wet or Dry
- 16 cu. yd. Clean Bore Collector Body with full opening rear door constructed of 1/4″ Steel.
- Baghouse and Separator Storage Constructed of 1/4″ Steel.
- Access Doors for Baghouse and Separator Storage Areas.
- Bolt-on Steel Side Chutes for Baghouse and Separator Unloading with Payload.
- Sixty (60) Acrylic Coated Snap Ring Filter Bags.
- Filter Bag Pulsing system
- Final Filter Screen at Vacuum Pump Inlet.
- Two (2) Hinge full opening rear door
- Wiring Harness.
- 14″ Stainless Steel Float Ball Shut-off.
- Automatic Disengagement of Speedometer/Odometer in Vacuum Mode.
- Hydraulically Raised and Lowered Full Opening Rear Door with Hydraulic Latch System.
- Hydraulic Tank with Sight and Temperature Gauge.
- Rear Door Support. -Patent Pending self-engaging safety prop
- Dump Tube Doors – Open/close with door
- Fold Out Ladder on Curb Side.
- Platform Between Body Ladder and Baghouse Area.
- DOT Approved Light Package.
- Single Acting Telescopic Dump Cylinder – 30° Dump Angle.
- Fenders and Rear Mud Flaps on Rear Axles.
- NEMA 4 Watertight Control Panel.
- Engine Throttle and Hydraulic Controls at Operator Station.
- Body raised alarm
- Grounding reel
- E-Stop button
